photos:CPU Upgrade for the SGI 2100
CPU Upgrade for the SGI 2100 arrived!
From 8 * 250MHz R10000 CPUs to 8 * 400MHz R12000 CPUs
   |
||
 |
 |
 |
 |
 |
|
 |
 |
|
   |
||
|
||
|
 |
|
|
|
|
|
|
|
|
||
|
||
|
 |
|
|
|
|
|
|
|
|
||
|
||
|
 |
|
|
|
|
|
|
|
|
||
Date: 2007:03:01 20:53:20
Date: 2007:03:01 20:55:27
Dual 400MHz R12000 CPUs with 8MB L2, 2GB RAMDate: 2007:03:01 21:02:16
Date: 2007:03:01 21:53:25
|
||
|
 |
|
|
|
|
|
|
|
|
||
|
||
|
 |
|
|
|
|
|
|
|
|
||
|
||
|
 |
|
|
|
|
|
|
|
|
||
PC used as a consoleDate: 2007:03:01 21:59:31
Date: 2007:03:01 21:59:45
As seen in the consoleDate: 2007:03:01 22:04:57
# hinv -vm
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0030179 part rev
IP31 Board: barcode KSB421 part 030-1523-001 rev C
IP31PIMMR12KS Board: barcode KRH853 part 030-1423-002 rev G
8P12_MPLN Board: barcode MFM465 part 030-1535-001 rev C
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode KSB362 part 030-1523-001 rev C
IP31PIMMR12KS Board: barcode KRH933 part 030-1423-002 rev G
Location: /hw/module/1/slot/n3/node
IP31 Board: barcode KSB458 part 030-1523-001 rev C
IP31PIMMR12KS Board: barcode KRH935 part 030-1423-002 rev G
Location: /hw/module/1/slot/n4/node
IP31PIMMR12KS Board: barcode KRH959 part 030-1423-002 rev G
IP31 Board: barcode KSB420 part 030-1523-001 rev C
Location: /hw/module/1/slot/r1/router
ROUTER_IR1 Board: barcode HKJ446 part 030-0841-003 rev B
Location: /hw/module/1/slot/r2/router
ROUTER_IR1 Board: barcode HKJ224 part 030-0841-003 rev B
Location: /hw/module/1/slot/io2/pci_xio
PCI_XIO Board: barcode HRW832 part 030-1062-002 rev E
Location: /hw/module/1/slot/io6/mscsi
MSCSI Board: barcode GTF796 part 030-1243-001 rev J
Location: /hw/module/1/slot/io8/fibre_channel
FIBRE_CHANNEL Board: barcode GLY027 part 030-0927-003 rev D
Location: /hw/module/1/slot/io7/xtalk_pci
XTALK_PCI Board: barcode JZY998 part 030-1275-003 rev A
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode LKG677 part 030-1124-003 rev A
8 400 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
CPU 0 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 1 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 2 at Module 1/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 3 at Module 1/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 4 at Module 1/Slot 3/Slice A: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 5 at Module 1/Slot 3/Slice B: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 6 at Module 1/Slot 4/Slice A: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
CPU 7 at Module 1/Slot 4/Slice B: 400 Mhz MIPS R12000 Processor Chip
(enabled)
Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 1: 2048 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Bank 5 contains 256 MB (Standard) DIMMS (enabled)
Bank 6 contains 256 MB (Standard) DIMMS (enabled)
Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 2048 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Bank 5 contains 256 MB (Standard) DIMMS (enabled)
Bank 6 contains 256 MB (Standard) DIMMS (enabled)
Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 3: 2048 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Bank 5 contains 256 MB (Standard) DIMMS (enabled)
Bank 6 contains 256 MB (Standard) DIMMS (enabled)
Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 4: 2048 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Bank 5 contains 256 MB (Standard) DIMMS (enabled)
Bank 6 contains 256 MB (Standard) DIMMS (enabled)
Bank 7 contains 256 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [3,4,5,6] (enabled)
ROUTER in Module 1/Slot 4: Revision 2: Active Ports [3,4,5,6] (enabled)
Integral SCSI controller 9: Version Fibre Channel QL2200, 33 MHz PCI
Integral SCSI controller 4: Version QL1040B (rev. 2), differential
Integral SCSI controller 2: Version QL1040B (rev. 2), differential
Integral SCSI controller 3: Version QL1040B (rev. 2), differential
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 7: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 8: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
Gigabit Ethernet: tg1, module 1, XIO slot io7
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Origin PCI XIO board, module 1 slot 2: Revision 4
PCI Adapter ID (vendor 0x1077, device 0x2200) PCI slot 0
Origin MSCSI board, module 1 slot 6: Revision 3
Origin FIBRE CHANNEL board, module 1 slot 8: Revision 4
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 6 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 4: Revision 6 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IP27prom in Module 1/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156